{"text":"No matter what hole I put my pins in my weight is screwed and no my 5th wheel doesn’t move \nTandems have holes 4 inches apart\nAnyone have any suggestions \nStr-11000\nDrvs-34460\nTnsms-32800\nTotal-79260\nShould I roll with it \nHeading to Indy from Baton Rouge ","videos":"[]","link":"{}","pics":"[]","canComment":true,"externalShare":false}
{"replyToPid":0,"replyTo":"","text":"Well you need to slide your tandems two holes forward, maybe three. If you’re tandems are already all the way forward there’s nothing you can do without a sliding fifth wheel. If you have an APU you have a 450 pound weight exemption on your drive axles ( not recognized in every state) other than that try to burn 65 gallons or so of fuel before you get to a scale...good luck"}
{"replyTo":"","text":"Almost all states give 1000# per axle as long as you’re under 80k. I hit a scale in Iowa and was 34,800 and all he said was slide the tandems. ","replyToPid":0}
669771 发表于 2020-11-05 11:40:01 Almost all states give 1000# per axle as long as you’re under 80k. I hit a scale in Iowa and was 34,800 and all he said was slide the tandems.
","text":"Most states my a55, just because you got a pass doesn’t mean it’s the norm.","replyToPid":405658}