I have no idea what I'm doing

716994

{"replyTo":"

652188 发表于 2019-08-28 08:53:26 You have to buy the plug for socket power unless your going to  hard wire. Forget splicing if its not your truck

","text":"it came with the power cord that goes from the power on the cb to the fuse box","replyToPid":194823}

676962

{"replyTo":"","text":"Should have came with it’s own wires I have the same cb and mine did. ","replyToPid":0}

685621

{"replyTo":"

716994 发表于 2019-08-28 11:28:44 it came with the power cord that goes from the power on the cb to the fuse box

","text":"There should be a red and black screw on connection to the left of the antenna connection. Thats where it is in my 2019 T680","replyToPid":194925}

652188

{"replyTo":"

716994 发表于 2019-08-28 11:28:44 it came with the power cord that goes from the power on the cb to the fuse box

","text":"In my case, i don't own the truck so i purchased the cord that plugs into the back of the cb and use a power socket. This way if i  change trucks due to defective mexican brand new parts like i have on 4 new trucks then i just unplug and go. My truck i would hard wire to battery and ground to the frame with a high end inline fuse.  Whatever decision you make, you be sure to give a shout out","replyToPid":194925}