Oil change

607899

{"replyTo":"

95010 发表于 2019-05-19 03:22:16 You have to prime your fuel system.  You can cycle your gauges 4 or 5 times. Turn your key to start but dont try to start. Let your annunciator light up and let the gauges cycle. Your fuel is being primed electrically while your gauges cycle. If you have to much air in the fuel lines you'll have to manually prime your fuel system. You have to use the pump on the fuel pump. Pump the fuel til you feel resistance and try to start your truck.

","text":"Thx bro ","replyToPid":37877}

664145

{"replyTo":"

607899 发表于 2019-05-19 01:35:22 I just got back here they have to fix what they broke or did

","text":"They gots 2.","replyToPid":37857}

664145

{"replyTo":"

596577 发表于 2019-05-19 02:22:57 yea cuz they did such a good job last time

","text":"Righting da wrong.","replyToPid":37861}

596577

{"replyTo":"

664145 发表于 2019-05-19 18:45:33 Righting da wrong.

","text":"2 wrongs dont make it right learn ur lesson and move on with life","replyToPid":38085}

664145

{"replyTo":"

596577 发表于 2019-05-19 20:47:34 2 wrongs dont make it right learn ur lesson and move on with life

","text":"Letting a place job U ova enables perpetuating bad customer service.","replyToPid":38173}

596577

{"replyTo":"

664145 发表于 2019-05-19 20:54:29 Letting a place job U ova enables perpetuating bad customer service.

","text":"you are right but if people would wise up and stop using them wouldn't have a business anymore to screw people","replyToPid":38184}

664145

{"replyToPid":38201,"replyTo":"

596577 发表于 2019-05-19 21:01:21 you are right but if people would wise up and stop using them wouldn't have a business anymore to screw people

","text":"If it's yo 1st visit thurr,\nletting 'em off da hook scott free shows they ripped U off."}

756483

{"replyTo":"

625878 发表于 2019-05-19 00:30:18 This is completely correct, you must have had a fuel filter change as well. There is air in your fuel system. Unscrew the priming handle on the drivers side of the block at the back of the engine, when the truck is running keep pushing on the priming valve until it is stiff, then do it back up and let the engine run for about another minute, shit down the engine and restart. \n\nThe problem should be fixed

","text":"great information as usual 👍","replyToPid":37829}