truck hacks

686228

{"replyTo":"

750760 发表于 2020-06-16 13:38:30 Set cruise control to 850rpm. Basically turn truck on or leave on after you stop. Then hit cruise control to turn on, then hit set/accel to bring up rpms to around 850 or max, which is usually that much. Then you're set for as long as you have fuel. The truck will rev up further to complete regen when needed. On a side note that also saves your engine from cavitation and gelling. It'll take about a gallon per hour run at that setting, usually

","text":"ty. I read about this for the 2017 model. it does not work on my 2016 though.","replyToPid":384498}

686228

{"replyTo":"

962976 发表于 2020-06-16 14:29:22 I have heard the trailer brake only trick. I used to use a half bottle of 20 oz on pedal.

","text":"I'll try thre trailer brake trick. unfortunately engine shuts off even when I rig a dowel rod on the pedal.","replyToPid":384501}

686228

{"replyTo":"","text":"now that's a hack! awesome idea.","replyToPid":0}

466905

{"replyTo":"","text":"my old company turned ours off, but I found a way around it. Not sure if yours has a menu to increase idle. if it does, just push the button and idle it higher. if your company was like mine, you push the button, release and then hold it down again.","replyToPid":0}