Hey brothers. I’m a new driver. My question is. Is it normal for my air lines to get ripped down. This is the second to

2221564

{"text":null,"videos":"[]","link":"{}","pics":"[]","canComment":true,"externalShare":false}

678033

{"replyTo":"","text":"you need to fix it because the lines will fray if they keep rubbing on your truck when you drive.","replyToPid":0}

586020

{"replyTo":"

2219702 发表于 2023-07-21 22:26:25 where do u got your fifth wheel sitting

","text":"On the back of the truck ","replyToPid":475797}

678033

{"replyTo":"","text":"do you have a hanger. my company issued the wrong hanger with my truck and replaced it a while later. so apparently there are different sized wire hangers. they are springy and slide on the bar along the back. you can adjust the hanger too. there's a slide rubber clamp that will adjust along the line to change the tension. if you don't have a hanger you probably need one.","replyToPid":0}

2133152

{"replyTo":"","text":"Either your lines are too short, your 5th wheel is too far back, or you’re making your turns too tight. ","replyToPid":0}

2209430

{"replyTo":"","text":"Once saw a driver with a chocolate face , I can't remember what mega company. He was bobtail and parked next to me.  i told him his air lines was ripped off, and he said he knew.  Drove off dragging them on thw ground like it wasn't no shite.","replyToPid":0}

2202915

{"replyToPid":475802,"replyTo":"

2209258 发表于 2023-07-22 00:45:16 This comment has been deleted

","text":"That was his old name rętard"}

2209258

{"replyToPid":475799,"replyTo":"

2202915 发表于 2023-07-22 00:38:38 This comment has been deleted

","text":"You going to bend over for him? Sounds like that's your preference"}

1730426

{"replyTo":"","text":"No.  probably need more slack so they have room to stretch when making turns","replyToPid":0}

2219702

{"replyTo":"

1730426 发表于 2023-07-21 19:09:54 No.  probably need more slack so they have room to stretch when making turns

","text":"where do u got your fifth wheel sitting","replyToPid":475795}

2179338

{"replyTo":"","text":"Need to adjust your fifth wheel plate. It’s probably set too far forward. Get someone to video you making a very slow turn so they can walk along side you and video it. When your lines begin to start taking up the slack, stop. Get out, look at the video then look at the position of your fifth wheel. If you have room to move it so the trailer is closer to the cab, move it and do it again. It may take you a couple of ttys to be able to get through your turn without any of your slack taken away. If that does not work, check to see if the hose hangar is mounted correctly and at the right height. It might be too high or the lines may be wrapped around each other which shortens them. If these tips don’t fix your issue, you may need to get new lines. ","replyToPid":0}

1661594

{"replyTo":"

586020 发表于 2023-07-21 22:44:21 On the back of the truck

","text":"No above the tires ","replyToPid":475798}

1730426

{"replyToPid":475799,"replyTo":"

2202915 发表于 2023-07-22 00:38:38 This comment has been deleted

","text":"hello 👋"}

1730426

{"replyTo":"

2219702 发表于 2023-07-21 22:26:25 where do u got your fifth wheel sitting

","text":"well mines all the way back because I have a Pete so it looks good but if I was in like a Volvo or cascadia I would have it slid more forward","replyToPid":475797}

1730426

{"replyTo":"

1730426 发表于 2023-07-22 19:28:48 well mines all the way back because I have a Pete so it looks good but if I was in like a Volvo or cascadia I would have it slid more forward

","text":"but I also use the extra space to have equipment over  hang as well because I do flatbed","replyToPid":475819}