Hi

262325

{"replyTo":"","text":"Thanks to everyone ","replyToPid":0}

262325

{"replyTo":"","text":"How about buying a volvo 2014 automatic,1.5 km ","replyToPid":0}

771835

{"replyToPid":0,"replyTo":"","text":"I have an extra truck I’ll sell ya it’s a international has 401k on it has a bumper to bumper warranty still till 500 k  I bought a Kenworth and don’t use it just sits at home while I drive my other truck. 50 k. Definitely worth it Double bunk 13 speed. dd 15. "}

262325

{"replyTo":"

771835 发表于 2019-09-10 04:11:43 I have an extra truck I’ll sell ya it’s a international has 401k on it has a bumper to bumper warranty still till 500 k  I bought a Kenworth and don’t use it just sits at home while I drive my other truck. 50 k. Definitely worth it Double bunk 13 speed. dd 15.

","text":"Can I call you ","replyToPid":204962}

262325

{"replyTo":"

567641 发表于 2019-09-09 12:45:54 check compression every cylinder don't buy if differences in cylinders more then 1.0 psi 18.4 new .....oil leaks main seal and  stored codes, dpf system, (A1 box)...differential ratio more for heavy houl?? 2.85 3.25 but 13 speed with 3.75 probably ok\n1500 rpm you  should be able to go 75 mph price is ok if original miles

","text":"Thanks ","replyToPid":204474}

262325

{"replyTo":"

731851 发表于 2019-09-09 18:39:21 this might sound stupid but when you get the maintenance records check for water leaks being repaired, possibly multiple times. That seems to be a big problem with Cascadias. Mine has been a pain, I've had the sam cab box replaced twice and the sam chassis box replaced once & the windshield & clearance lights resealed several times. I think the body shop at the Freightliner in Knoxville finally did it right, haven't had a problem for quite a while.

","text":"Thanks ","replyToPid":204580}

771835

{"replyTo":"

262325 发表于 2019-09-10 04:14:20 Can I call you

","text":"Send me your email and I’ll send you my number to chat ","replyToPid":204964}

771835

{"replyTo":"

262325 发表于 2019-09-10 04:14:20 Can I call you

","text":"The engine is a 485 Cummins not a dd15 ","replyToPid":204964}

262325

{"replyTo":"

567641 发表于 2019-09-10 00:34:45 when they hook up the computer will show you all cylinders if 4 are at let's say 17.5 .and1 is at 16.8 and15.3 engine is going bad all have to be same psi + - .2psi ...penske are b s tray to get from quest near Macon GA or ex big company a lot of the big companies sell them at 500 000ml

","text":"Hey buddy i got the ecm report ,can I email you if you have a look . Thanks ","replyToPid":204890}

262325

{"replyTo":"","text":"Hey buddy i got the ecm report ,can I send you if you have a look . Thanks ","replyToPid":0}