Hey brothers. I’m a new driver. My question is. Is it normal for my air lines to get ripped down. This is the second to

678033

{"replyTo":"","text":"do you have a hanger. my company issued the wrong hanger with my truck and replaced it a while later. so apparently there are different sized wire hangers. they are springy and slide on the bar along the back. you can adjust the hanger too. there's a slide rubber clamp that will adjust along the line to change the tension. if you don't have a hanger you probably need one.","replyToPid":0}

678033

{"replyTo":"","text":"you need to fix it because the lines will fray if they keep rubbing on your truck when you drive.","replyToPid":0}

2144902

{"replyTo":"","text":"airlines are probably snagging on the headache rack because of were your springs are mounted. I am a flatbedder myself I had a similar issue. airlines would snag the chain and binder rack during turns. what I did was drilled a half inch hole high on the rack and bolted a 12 inch long eye bolt to the rack hooked my springs to the eye bolt. problem solved","replyToPid":0}

665190

{"replyTo":"","text":"Your air lines should hang down near, but not touching, the catwalk. As with Goldilocks and porridge you want your air line slack just right - not too loose not too taut.","replyToPid":0}