governed speed

908202

{"replyTo":"

1388152 发表于 2022-04-04 20:53:36 I can make a dd15 spank anything with so simple programming those old old Pete's are junk compared to the new freightshakers

","text":"Roflmmfao u got jokes driva ","replyToPid":461249}

1388152

{"replyTo":"

612134 发表于 2022-04-04 17:53:15 make sure you have your four digit pin number before bringing it in to get turned up. if you just bought it. have you seen the price of fuel yet? why would you turn it up more? turn it down! 62mph haha you're welcome

","text":"I have pins","replyToPid":461238}

1388152

{"replyTo":"

147103 发表于 2022-04-04 21:46:31 I have DD 16 that's turned to max. it's strong and good on fuel. if I don't push it. However I also have owned numerous mechanical Cat and Cummins.  I think on the pull. The mechanical wins. Mechanical is definitely more reliable.

","text":"I used to build 6nz s  they'll pull but I can change the torque mapping on late Detroits and twist frames I have engineering access,  all with programming cats need mechanical work in addition to programming and don't get the mileage or last plus the cost of catapillar parts is insane \nanyway she's asking for a simple parameter change easy breezy quick and easy","replyToPid":461256}

908202

{"replyTo":"

147103 发表于 2022-04-04 21:46:31 I have DD 16 that's turned to max. it's strong and good on fuel. if I don't push it. However I also have owned numerous mechanical Cat and Cummins.  I think on the pull. The mechanical wins. Mechanical is definitely more reliable.

","text":"Id take a big cam 400 with a zero button n couple shims any day ","replyToPid":461256}

1388152

{"replyTo":"

908202 发表于 2022-04-05 00:26:28 Id take a big cam 400 with a zero button n couple shims any day

","text":"push rod engine no match for technology big cams Cummapart I've replaced many broken injectors  and isx early high pressure pump failures causing spun main bearings but I can adjust and change Cummings parameters also","replyToPid":461270}

671631

{"replyToPid":0,"replyTo":"","text":"Yes I do but, they are not in your area AND tbh I do not feel comfortable disclosing that information in this forum. I would suggest taking it back to wherever you bought it from to have it taken off or take it to the dealership. If it’s not yours then TECHNICALLY you may not be able to do that without the owner’s permission. Good luck and be safe. "}

1467525

{"replyTo":"","text":"I used run 6nz cat it doesn’t come close to pulling as good as isx Cummins  cat had more horsepower and better rearends ","replyToPid":0}

362000

{"replyTo":"","text":"who else remembers when turning up a truck actually involved tools","replyToPid":0}