Anyone running this and if so what’s ur thoughts

678965

{"replyTo":"","text":"I’ll be careful not wanting to spend the cash if I don’t have to all I’m too run is my microwave coffee pot and a tv once I get this inverter figured out. And a blender huh mind me asking wat u need that for ","replyToPid":0}

678965

{"replyTo":"

607385 发表于 2019-06-07 18:03:56 10.4 just be careful these drivers had me in my feelings thinking I was doing something wrong till they go.. so u can run you fridge, microwave, coffee pot, and.. no no and lol I just wanted to run my blender ( 3000w)  hahahaha but in case i wanna upgrade the cooler ya know

","text":"Nd hey don’t let them guys get in ya head . They can be Butts at times but lot of guys/gals just trying to help out and maybe shine some light on a situation ","replyToPid":58682}

678965

{"replyTo":"","text":"ANd hey don’t let them guys get in ya ur feelers . They can be harsh at times but lot of guys/gals just trying to help out and maybe shine some light on a situation ","replyToPid":0}

571887

{"replyTo":"

678965 发表于 2019-06-07 18:30:05 I’ll be careful not wanting to spend the cash if I don’t have to all I’m too run is my microwave coffee pot and a tv once I get this inverter figured out. And a blender huh mind me asking wat u need that for

","text":"you'll need at least a 3000 w inverter","replyToPid":58719}

678965

{"replyToPid":59083,"replyTo":"

571887 发表于 2019-06-07 23:02:19 you'll need at least a 3000 w inverter

","text":"Why u say that if all that’s being ran on it is a microwave 90% of the time?  "}

655723

{"replyTo":"

662769 发表于 2019-06-07 17:02:42 It's all about proper ground. Directly to the frame. Clean the frame to bare metal and attach. Remember there is a difference between a ground and a negative on a battery. Hook directly to frame.

","text":"The negative on the battery should be within .2v of the voltage on the frame. \n20+ years as a mechanic and I’ve seen lots of good components replaced when the real problem was poor connections. Find someone who understands how to perform a proper voltage drop test and see what the drop is between the power source and the inverter and between the ground source and the inverter.\nI’d use 10 gauge wire, direct to the batteries with a circuit breaker at the battery connection. (If your positive and negative connections are both at the battery, you have almost 0 potential for voltage drop)","replyToPid":58615}