Spread Axle Inquiry

614172

{"text":"Looking at buying a 48 flatbed spread axle. Wondering what the pros and cons were and what your preference is.","pics":"[]","canComment":true}

618572

{"replyTo":"","text":"I pulled an all aluminum 48x102 with a 10/2 spread. Had two boxes between the spread axles and a dump air switch in the cab. You for sure want to be able to dump the air bags when backing and sharp turns.","replyToPid":0}

176266

{"replyTo":"","text":"I would recommend not putting the boxes between the axles for the simple reason if you blow a tire and yes a virgin tire does blow. If you put them there and a tire blows those pricey boxes are now destroyed. I would mount them closer to the front or in the center.","replyToPid":0}

614172

{"replyTo":"","text":"thanks for your input guys!","replyToPid":0}

229859

{"replyTo":"

618572 发表于 2019-02-25 23:34:37 I pulled an all aluminum 48x102 with a 10/2 spread. Had two boxes between the spread axles and a dump air switch in the cab. You for sure want to be able to dump the air bags when backing and sharp turns.

","text":"48' Is To Short\nUnless your moving \nCoils\nDon't waste your money","replyToPid":3603}

630524

{"replyTo":"","text":"i pull a frameless end dump with a 2-10 spread.  must have a dump on back axle for tight turns and backing up , they can be hard on tires but they ride good","replyToPid":0}

628506

{"replyTo":"","text":"I’d get a 53’, not a 48’","replyToPid":0}