Pinion seal

1010939

{"text":"New pinion seal and yoke leaking again after one day, anybody had this problem before?","videos":"[]","link":"{}","pics":"[]","canComment":true,"externalShare":false}

1074173

{"replyTo":"","text":"Could be a couple things\n-drive shaft isn’t clocked correctly, If it is then it might be clock backwards\n-seal was damaged when installed\n-caged bearings is bad\n-could have a bad drive shaft hanger. \nMost of these things you can check yourself","replyToPid":0}

1010939

{"replyTo":"

147103 发表于 2021-02-25 23:05:20 My 1st step. Go back to shop and complain.  Just don't let them bluff you into repairs truck not need. Definitely check drive shaft balance

","text":"Lol I probably won’t go back over there, they had my truck for two weeks and still couldn’t get it right ","replyToPid":418192}

1010939

{"replyTo":"

147103 发表于 2021-02-25 22:23:22 Did you replace yoke? Did you torque nut?

","text":"Yes I have a new yoke , not sure what they did about the nut ","replyToPid":418185}

936953

{"replyTo":"","text":"Mine leaked too after replacement. Drove 1800 miles to Texas, by the time I made it back it stopped. Brought it back in, they washed it, checked it out. Said it wasn’t leaking. Basically though I was nuts. Haven’t seen a drop since, been over a year now. ","replyToPid":0}

936953

{"replyTo":"","text":"The seal is held taught by a spring, it’s not uncommon for the spring to pop out during installation. Any mechanic worth a nickel knows to check that before reasonable of the yoke.","replyToPid":0}

352112

{"replyTo":"","text":"Bad nut not keeping yoke tight or drive shaft need balanced","replyToPid":0}

1010939

{"replyTo":"

936953 发表于 2021-02-25 22:15:08 Mine leaked too after replacement. Drove 1800 miles to Texas, by the time I made it back it stopped. Brought it back in, they washed it, checked it out. Said it wasn’t leaking. Basically though I was nuts. Haven’t seen a drop since, been over a year now.

","text":"It don’t seem as bad as it was before, it just look wet , I’ll wash it down and see if it’s leaking ","replyToPid":418181}

1010939

{"replyTo":"

936953 发表于 2021-02-25 22:20:28 The seal is held taught by a spring, it’s not uncommon for the spring to pop out during installation. Any mechanic worth a nickel knows to check that before reasonable of the yoke.

","text":"Lol , right. I’ll let someone else look at it if I need to","replyToPid":418183}

1010939

{"replyTo":"

352112 发表于 2021-02-25 21:26:58 Bad nut not keeping yoke tight or drive shaft need balanced

","text":"I’ll check into it if I need to , ","replyToPid":418175}